BobCAD Customer Portal
Getting started, two-step sign-in, and what you can do on the site
The BobCAD Customer Portal is your private page for your BobCAD account. After you sign in you can see your company details, your BobCAD account manager and contacts, your invoices, and your perpetual licenses, and you can download your software and request a license de-authorization.
This guide shows you how to create your portal account, set up two-step sign-in with an authenticator app, and use each part of the site. If something goes wrong, see Frequently asked questions near the end.
1. Before you start
Have these ready. Setting up takes about ten minutes.
- Your BobCAD Customer ID. It is printed on your invoices as "Customer ID#" and appears in your order confirmation emails. If you cannot find it, contact BobCAD Support (see the end of this guide).
- The email address BobCAD has on file for you. This is the email you used when you ordered, or an address that BobCAD lists as a contact on your account.
- A phone, tablet or computer with an authenticator app. Examples: Microsoft Authenticator, Google Authenticator, Authy or 1Password. Any app that makes 6-digit time-based codes will work.
- A safe place to keep your recovery codes, such as a password manager or a printed page in a locked drawer.
2. Create your portal account
- On the BobCAD support site, click My Account in the top menu. The portal opens in a new browser tab.
- On the Sign in page, click Create your portal account.
- Enter your Customer ID and the email address we have on file for you, then click Email me the link.
- Open your email and click the link in the message from BobCAD. The email tells you how long the link works (24 hours for a new account). Look in your spam or junk folder if you do not see it within a few minutes.
- Choose a password (see the next section), then continue to set up your authenticator app (section 3).
NOTE: For your security, the page always shows the same message ("If those details match our records, we have emailed you a link"), whether or not the details matched. If no email arrives, check the Customer ID and the email address, and see the questions at the end of this guide.
Choosing a password
- Use at least 18 characters. A short sentence of unrelated words works well and is easy to remember, for example: purple window seven tractors.
- Do not use your name, your email address or common words and patterns (such as repeated characters).
- Use a password you do not use anywhere else.
3. Set up two-step sign-in (authenticator app)
Two-step sign-in is required for every portal account. After your password, the portal asks for a 6-digit code from your authenticator app. This keeps your account, invoices and license information safe even if someone learns your password.
Set up your authenticator app
After you choose your password, the portal shows the page Set up two-factor authentication with a QR code.
- Open your authenticator app and choose Add account (the wording differs between apps; look for a plus sign).
- Choose Scan a QR code and point your camera at the QR code on the screen. If you cannot scan it, choose to enter the setup key manually and type the key shown under the QR code.
- The app now shows a 6-digit code that changes every 30 seconds. Type the current code into the Code from the app box.
- Click Confirm and continue.
Save your recovery codes
Next, the portal shows 10 recovery codes. A recovery code lets you sign in if you lose your phone or cannot use your authenticator app.
IMPORTANT: The recovery codes are shown only once. Copy them into a password manager or print the page before you continue. Each code works one time only.
Click I have saved them - continue. You are now signed in.
4. Signing in
- Click My Account on the BobCAD support site (the portal opens in a new tab).
- Enter your Email address and Password, then click Continue.
- Enter the 6-digit code from your authenticator app and click Verify.
TIP: Codes change every 30 seconds. If a code is rejected, wait for the next code and try again. A code can be used only once.
Staying signed in
- You are signed out automatically after 30 minutes without activity, and in any case after 8 hours.
- Always click Sign out (top right) when you use a shared or public computer.
- If you change your password, you are signed out on all other devices.
5. What you will see on the site
Your account header
At the top of the page you see your company name and Customer ID, your primary contact with phone numbers and email, your address, and your support and subscription expiration dates when they apply.
Account Manager tab
|
Section |
What it shows |
|
Account manager |
The BobCAD team member for your account with phone and email. Click the green Contact button to send an email. |
|
Additional Contacts |
Other people BobCAD has on file for your company, with department, phone and email. |
|
My Invoices |
Your invoices, newest first, with invoice number, order date and order total. Click View Invoice to open an invoice. |
Viewing and printing an invoice
Click View Invoice next to an invoice. The invoice opens in the BobCAD invoice layout with your bill-to and ship-to details, the products ordered, sales tax, shipping, the order total, the amount paid and the balance due. If the order included software licenses, a License ID / Password table is shown at the bottom.
- Click Print to print the invoice. In the print window you can also choose Save as PDF as the printer to keep a copy.
- Click Back to my account to return to the list.
NOTE: Cancelled invoices are not shown.
Perpetual Licenses tab
Each license on your account has its own row:
|
On the row |
What it means |
|
License # |
Your license ID. Click it (or the arrow beside it) to see the products included. The Computer Name appears here when the license is registered to a computer. |
|
Password |
The registration code (license password) you use together with the license ID when you register the software. Keep it private. |
|
Registered (green) |
The license is currently activated on a computer. |
|
Not registered (grey) |
The license is not currently activated. You can register it from the BobCAD software using the license ID and password. |
|
Download button |
Downloads the installer for the newest software version on that license, for example "Download BobCAD V38". Older versions are on the Downloads page of the support site. |
|
Request De-Auth (red) |
Appears only for registered licenses. Use it to ask BobCAD Support to release a license from a computer so you can register it somewhere else (see section 6). |
Account security page
Click Account security (top right) to:
- Change your password. Enter your current password, then the new one twice.
- Generate new recovery codes. Enter your password and click Generate new recovery codes. The old codes stop working as soon as new ones are created, so save the new set.
6. Requesting a license de-authorization (transfer)
A license can be registered on one computer at a time. To move it to another computer it first has to be released ("de-authorized").
Software version 30 and newer: do it yourself (fastest)
Open the BobCAD software, go to File > Help > Transfer License and follow the steps. You can then register the same license on the new computer. See the article
Transfer / Deauthorize a license (BobCAD-CAM V30 and up)
Older versions, or if you cannot reach the old computer: ask Support
- On the Perpetual Licenses tab, click Request De-Auth on the license.
- Describe why the license needs to be de-authorized (for example: "Computer replaced, old computer no longer available").
- Click Send Request. You will see a green confirmation message at the top of the page.
- BobCAD Technical Support reviews every request and replies to your email. Requests take time to process. For urgent cases call (727) 489-0003 or email support@bobcad.com.
NOTE: To prevent duplicate requests, a second request for the same license within about 10 minutes is not sent. For software versions 24 to 29 you can also use User Codes; see the knowledge base article for your version.
7. Frequently asked questions
I did not receive the email with the link.
Check your spam or junk folder, and search for a message from BobCAD.
Make sure you entered your Customer ID correctly and the same email address BobCAD has on file. If you are not sure which address that is, contact BobCAD Support.
Wait a few minutes and try again. For safety, only a limited number of link emails are sent per address per hour.
If your company uses strict email filtering, ask your IT department to allow email from BobCAD.
The page says the link is invalid or has expired.
Links work once and expire after a short time. Go back to the sign-in page and use Forgot your password? (if you already have an account) or Create your portal account to get a new link. Use the newest email only; a new link cancels the older ones.
Where do I find my Customer ID?
On any BobCAD invoice ("Customer ID#") and in your order confirmation emails. Or contact BobCAD Support.
I forgot my password.
On the sign-in page click Forgot your password?, enter your email address and click Send link. The link works for 30 minutes. After you choose a new password, your authenticator app keeps working.
My authenticator code is not accepted.
Wait for the app to show a new code and try again; each code works once.
Check that the date and time on your phone are set to automatic. A clock that is off by more than a minute makes the codes fail.
Make sure you are using the entry for the BobCAD Customer Portal if your app holds several accounts.
Still stuck? Use a recovery code (next question).
I lost my phone or cannot use my authenticator app.
On the code page click I can't use my authenticator app, type one of your recovery codes and click Sign in. Each recovery code works once. Afterwards, go to Account security and generate a new set of codes.
If you have no recovery codes left, contact BobCAD Support. After we verify your identity we can reset your authenticator and email you a link to set it up again.
I am getting a new phone. How do I keep my sign-in?
Before you wipe or replace the old phone, move your authenticator accounts to the new phone using your authenticator app's transfer or backup feature (for example "Transfer accounts" in Google Authenticator, or account backup in Microsoft Authenticator). Then test a sign-in on the new phone.
If the old phone is already gone, use a recovery code to sign in, or contact BobCAD Support to reset your authenticator.
It says "Too many attempts". What now?
After several wrong passwords or codes in a row the account is paused for about 15 minutes to protect it. Wait, then try again, or contact BobCAD Support to unlock it sooner.
Why was I signed out?
You are signed out after 30 minutes without activity, after 8 hours, and whenever your password or two-step settings change. Sign in again.
Can other people at my company use the portal?
Yes. Every person has their own account and their own authenticator. A person can create an account when their email address is on file as a contact on your BobCAD account. To add a contact, ask your BobCAD account manager or contact Support. Please do not share one account between several people.
A license shows "Not registered". Is something wrong?
No. It means the license is not currently activated on a computer, for example because it was transferred or has not been registered yet. Register it from the BobCAD software with the license ID and password shown on the row.
A license or an invoice is missing.
Cancelled invoices are not shown. If you expect an item that does not appear, contact BobCAD Support with the invoice number or the license ID.
Is the license password safe to show here?
It is shown only after you have signed in with your password and a two-step code, and only for your own account. Treat it like any registration code and do not post it publicly.
Does BobCAD ever ask for my password or codes?
Never. BobCAD staff will never ask for your password, a 6-digit code or a recovery code, by phone, email or chat. If someone asks, do not share them and tell BobCAD Support.
8. Quick reference
|
Problem |
What to do |
|
No link email |
Check spam, Customer ID and the email on file; wait a few minutes; try again. |
|
Link expired |
Request a new one: Forgot your password? or Create your portal account. |
|
Forgot password |
Forgot your password? on the sign-in page. |
|
Code rejected |
Wait for the next code; set the phone clock to automatic. |
|
No phone, have recovery codes |
I can't use my authenticator app, type a recovery code. |
|
No phone, no recovery codes |
Contact BobCAD Support to reset your authenticator. |
|
Locked out |
Wait about 15 minutes or contact Support. |
|
Move a license to a new computer |
V30 and newer: File > Help > Transfer License. Otherwise Request De-Auth. |
9. Contact BobCAD Support
- Phone: (727) 489-0003
- Email: support@bobcad.com
When you contact us, please have your Customer ID ready. For your security we will verify your identity before we change anything on your account.